Joana Rita Antunes Gonçalves Madeira e Góis
|
|
Data da última atualização
»Last update
:
25/09/2015 |
Dados pessoais (Personal data)
Nome completo
Full name |
Joana Rita Antunes Gonçalves Madeira e Góis |
Nome em citações bibliográficas
Quoting name |
Góis, Joana R. |
Domínio científico de atuação
Scientific domain |
Engenharia e Tecnologia-Engenharia Química. Engenharia e Tecnologia-Engenharia Médica. Ciências Médicas-Biotecnologia Médica. Engenharia e Tecnologia-Nanotecnologia.
|
Endereço profissional
Professional address |
Universidade de Coimbra Centro de Engenharia Mecânica da Universidade de Coimbra Polo II, Rua Sílvio Lima Coimbra 3030-290 Coimbra Portugal Telefone: (+351)239798700Extensão: 760 Correio electrónico: joanagois@eq.uc.pt |
Sexo
Gender |
Feminino»Female |
Graus Académicos
(Academic Degrees)
2007-2008 |
Mestrado Master degree |
Mestrado Integrado em Engenharia Biomédica
(1 anos » years)
.
Universidade de Coimbra,
Portugal.
|
2002-2007 |
Licenciatura Licentiate degree |
Engenharia Biomédica
(5 anos » years)
.
Universidade de Coimbra,
Portugal.
|
Vínculos profissionais
(Professional Positions)
Fundação para a Ciência e a Tecnologia |
Out/2011-Actual |
Outra Situação |
Jun/2010-Set/2011 |
Estudante de doutoramento |
Jun/2009-Jun/2010 |
Outra Situação |
Mai/2008-Dez/2008 |
Outra Situação |
Línguas (Languages)
Compreende Understandig |
Inglês (Bem). |
Fala Speaking |
Inglês (Bem). |
Lê Reading |
Inglês (Bem). |
Escreve Writing |
Inglês (Bem). |
Prémios e títulos (Awards Prizes, and Honours)
2010 |
Distinguished Article of 2010,
International Reviews in Predictive, Preventive and Personalized Medicine (EPMA)..
|
2014 |
Cover of Polymer Chemistry (Vol. 5, Issue 16, 2014),
Royal Society of Chemistry .
|
Produção científica, técnica e artística/cultural
(Scientific, technical and artistical/cultural
production)
Capítulos de livros publicados Published book chapters |
1. |
Rocha, Nuno; Mendonça, Patrícia; Góis, Joana R; Cordeiro, Rosemeyre; Fonseca, Ana; Ferreira, Paula; Guliashvili, Tamaz; Matyjaszewski, Krzysztof; Serra, Arménio; Coelho, Jorge. 2013. The Importance of Controlled/Living Radical Polymerization Techniques in the Design of Tailor Made Nanoparticles for Drug
Delivery Systems. In Drug Delivery Systems: Advanced Technologies Potentially Applicable in Personalised Treatment, ed. Jorge Coelho, 315 - 357. ISBN: 978-94-007-6009-7. Dordrecht: Springer Netherlands.
|
|
|
|
2. |
Fonseca, Ana C; Ferreira, Paula; Cordeiro, Rosemeyre A; Mendonça, Patrícia V; Góis, Joana R; Gil, Maria H; Coelho, Jorge F. J. 2013. Drug Delivery Systems for Predictive Medicine: Polymers as Tools for Advanced Applications. In New Strategies to Advance Pre/Diabetes Care: Integrative Approach by PPPM, ed. Mahmood S. Mozaffari, 399 - 455. ISBN: 978-94-007-5970-1. Dordrecht: Springer Netherlands.
|
|
|
|
Artigos em revistas sem arbitragem científica Papers in periodics without scientific refereeing |
1. |
Rosa, Natacha; Martins, Gabriela V; Bastos, Margarida M; Gois, Joana R; Coelho, Jorge F; Marques, Juliana; Tavares, Carlos J; Magalhães, Fernão D. 2015. "Preparation of robust polyamide microcapsules by interfacial polycondensation of p-phenylenediamine and sebacoyl chloride
and plasticization with oleic acid ", Journal of Microencapsulation 32, 4: 349 - 357.
|
|
|
|
2. |
Catalão, Francisco; Góis, Joana R; Trino, A. S. M; Serra, Arménio C; Coelho, Jorge F. J. 2015. "Facile synthesis of well-controlled poly(glycidyl methacrylate) and its block copolymers via SARA ATRP at room temperature", Polym. Chem. 6, 10: 1875 - 1882.
|
|
|
|
3. |
Góis, Joana R; Konkolewic, Dominik; Popov, Anatoliy V; Guliashvili, Tamaz; Matyjaszewski, Krzysztof; Serra, Arménio C; Coelho, Jorge F. J. 2014. "Improvement of the control over SARA ATRP of 2-(diisopropylamino)ethyl methacrylate by slow and continuous addition of sodium
dithionite", Polymer Chemistry 5, 16: 4617 - 4617.
|
|
|
|
4. |
Góis, Joana R; Rocha, Nuno; Popov, Anatoliy V; Guliashvili, Tamaz; Matyjaszewski, Krzysztof; Serra, Arménio C; Coelho, Jorge F. J. 2014. "Synthesis of well-defined functionalized poly(2-(diisopropylamino)ethyl methacrylate) using ATRP with sodium dithionite as
a SARA agent", Polymer Chemistry 5, 12: 3919 - 3919.
|
|
|
|
5. |
Konkolewicz, Dominik; Krys, Pawel; Góis, Joana R; Mendonça, Patrícia V; Zhong, Mingjiang; Wang, Yu; Gennaro, Armando; Isse, Abdirisak A; Fantin, Marco; Matyjaszewski, Krzysztof. 2014. "Aqueous RDRP in the Presence of Cu0: The Exceptional Activity of CuI Confirms the SARA ATRP Mechanism ", Macromolecules 47, 2: 560 - 570.
|
|
|
|
6. |
Marques, J.; Oliveira, L. F; Pinto, R. T; Coutinho, P. J. G; Parpot, P.; Góis, J. R; Coelho, J. F. J; Magalhães, F. D; Tavares, C. J. 2013. "Release of Volatile Compounds from Polymeric Microcapsules Mediated by Photocatalytic Nanoparticles", International Journal of Photoenergy 2013, 2013: 1 - 9.
|
|
|
|
7. |
Rocha, Nuno; Coelho, Jorge F; Gois, Joana R; Gil, Maria H; Gonçalves, Pedro M; Guthrie, James T. 2013. "Poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-Poly(vinyl chloride): Understanding the synthesis of an amphiphilic
PVC block copolymer on a pilot scale", Journal of Vinyl and Additive Technology 19, 2: 94 - 104.
|
|
|
|
8. |
Coelho, Jorge F; Fonseca, A.C.; Gois, J.R.; Gonçalves, Pedro M; Popov, Anatoliy V; Gil, M.H.. 2011. "Scaling-up of poly(vinyl chloride) prepared by single electron transfer degenerative chain transfer mediated living radical
polymerization in water media: 1) Low molecular weight. Kinetic analysis", Chemical Engineering Journal 169, 1-3: 399 - 413.
|
|
|
|
9. |
Coelho, Jorge; Ferreira, Paula C; Alves, Patricia; Cordeiro, Rosemeyre; Fonseca, Ana C; Góis, Joana R; Gil, Maria H. 2010. "Drug delivery systems: Advanced technologies potentially applicable in personalized treatments", The EPMA Journal 1, 1: 164 - 209. Advanced drug delivery systems (DDS) present indubitable benefits for drug administration. Over the past three decades, new
approaches have been suggested for the development of novel carriers for drug delivery. In this review, we describe general
concepts and emerging research in this field based on multidisciplinary approaches aimed at creating personalized treatment
for a broad range of highly prevalent diseases (e.g., cancer and diabetes). This review is composed of two parts. The first
part provides an overview on currently available drug delivery technologies including a brief history on the development of
these systems and some of the research strategies applied. The second part provides information about the most advanced drug
delivery devices using stimuliresponsive polymers. Their synthesis using controlled-living radical polymerization strategy
is described. In a near future it is predictable the appearance of new effective tailor-made DDS, resulting from knowledge
of different interdisciplinary sciences, in a perspective of creating personalized medical solutions.
![Homepage da produção](/wayback/20160513212543im_/http://www.degois.pt/imagens/degois/home16.png) |
|
|
|
10. |
Coelho, Jorge F. J; Góis, Joana R; Fonseca, Ana C; Gil, M. H. 2010. "Modification of Poly(3-hydroxybutyrate)-co-Poly (3-hydroxyvalerate) with Natural Rubber", Journal of Applied Polymer Science 116, 2: 718 - 726. Composites of poly(3-hydroxybutyrate)-copoly( 3-hydroxyvalerate) (PHBHV) with 6% of 3-hydroxyvalerate (HV) and natural rubber
(NR) were prepared by a solvent-casting method. Different approaches were tested for the composite preparation. Both PHBHV
and NR were dissolved in chloroform, followed by its evaporation, giving various layers. The mechanical properties and morphology
of the obtained composites were evaluated by tensile tests and scanning electron microscopy (SEM), respectively. The obtained
results demonstrated that the final composite has excellent mechanical properties when compared with PHBHV. SEM analysis unequivocally
showed the excellent adhesion between the two polymeric layers. This new material was also tested as a drug delivering system
using flurbiprofen as a model drug, and then the diffusion coefficients were determined. This article describes an easy method
to produce a desirable composite from PHBHV and NR.
![Homepage da produção](/wayback/20160513212543im_/http://www.degois.pt/imagens/degois/home16.png) |
|
|
|
11. |
Coelho, Jorge F; Góis, Joana; Fonseca, Ana C; CARVALHO, RUI A; POPOV, ANATOLIY V; PERCEC, VIRGIL; Gil, M. H. 2009. "Synthesis of Poly(2-methoxyethyl acrylate) by Single Electron Transfer—Degenerative Transfer Living Radical Polymerization
Catalyzed by Na2S2O4 in Water", Journal of Polymer Science: Part A: Polymer Chemistry 47, 17: 4454 - 4463. Living radical polymerization of 2-methoxyethyl acrylate (MEA) was achieved by single-electron-transfer/degenerative transfer
mediated living radical polymerization (SET-DTLRP) in water catalyzed by sodium dithionate. The poly(2- methoxyethyl acrylate)
is an amphiphilic polymer with a hydrophobic part (polyethylene chain) and a mildly hydrophilic tail. The plots of number-average
molecular weight versus conversion and ln{[M]0/[M]} versus time are linear, indicating a controlled polymerization. This method
leads to the preparation of a,x-di(iodo) poly(2- methoxyethyl acrylate)s (a,x-di(iodo)PMEA) macroinitiators that can be further
functionalized. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right-angle
light scattering (RALLS), a differential viscometer (DV) and refractive index (RI). The method studied in this work represents
a possible route to prepare well-tailored macromolecules made of 2-methoxyethyl acrylate (biocompatible material) in an environmentally
friendly reaction medium. To the best of our knowledge there is no previous report dealing with the synthesis of PMEA by any
LRP approach in aqueous medium. .
![Homepage da produção](/wayback/20160513212543im_/http://www.degois.pt/imagens/degois/home16.png) |
|
|
|
Organização de evento Event organization |
1. |
Góis, Joan R. A. G. M. e; Matias, Aurea A. J; Cordeiro, Rosemeyre; Almeida, Gilberto; Santos, Armanda; Ferreira, Ana. Noite Branca Coimbra,2006 (Outro). |
Dados Complementares (Additional data)
Participação em eventos Event participation |
Participação como Keynote Speaker Participation as Keynote Speaker |
1. |
Conference on Nanotechnologies Applications Manano European Program Marie Curie, 2014 (Congresso). Nome do evento: Conference on Nanotechnologies Applications Manano European Program Marie Curie; Nome da Instituição: Department of Chemical Engineering – University of Coimbra; Cidade do evento: Coimbra / University of Coimbra. “Nanotechnology, the potential of self-assembly approaches”. Oral communication. Conference on Nanotechnologies Applications
Manano European Program Marie Curie. University of Coimbra, September 3rd, 2014. |
2. |
1st Seminar on Organically Modified Silica Aerogels, 2014 (Seminário). Nome do evento: 1st Seminar on Organically Modified Silica Aerogels; Nome da Instituição: University of Coimbra; Cidade do evento: Coimbra / University of Coimbra. “Nanotechnology, the potential of self-assembly approaches”. Oral communication. 1st Seminar on Organically Modified Silica
Aerogels. University of Coimbra, March 19th, 2014. . |
3. |
20th International Symposium on surfactants in solution , 2014 (Simpósio). Nome do evento: 20th International Symposium on surfactants in solution ; Nome da Instituição: University of Coimbra; Cidade do evento: Coimbra / University of Coimbra. “Brush-Type pH-responsive block copolymers as nanocarriers for smart drug delivery applications”. Oral communication. 20th
International Symposium on Surfactants in Solution (SIS 2014). University of Coimbra, 22-27 June, 2014. . |
4. |
36th Controlled Radical Polymerization Consortium Meeting- Fall, 2013 (Encontro). Nome do evento: 36th CLP Consortium Meeting, ; Nome da Instituição: Matyjaszewski Polymer Group; Cidade do evento: Pittsburgh / Carnegie Mellon University. “Development of ATRP of 2 (diisopropylamino)ethyl methacrylate using inorganic sulfites as reducing agents “. Oral communication.
36th CLP Consortium Meeting, Carnegie Mellon University, Fall 2013. . |
Indicadores de produção
(Production indicators)
Produção científica
Scientific production |
Produção técnica
Technical production |
Dados complementares
data |
Produção científica Scientific production |
13 |
Livros e capítulos Books and book chapters |
2 |
Capítulos de livros publicados Published book chapters |
2 |
Artigos científicos em revistas Papers in periodics |
11 |
Sem arbitragem científica Without scientific refereeing |
11 |
Produção técnica Technical production |
1 |
Outros tipos de produção técnica Other technical production |
1 |
Dados complementares (Additional data) |
4 |
Participação em Eventos Event participation |
4 |
Outras informações relevantes
Joana Rita Antunes Gonçalves Madeira e Góis. Concluiu Mestrado Integrado em Engenharia Biomédica pela Universidade de
Coimbra em 2008. É Estudante de doutoramento na Universidade de Coimbra. Publicou 11 artigos em revistas especializadas,
possui 2 capítulos de livros publicados. Participou em 1 evento no estrangeiro e 3 em Portugal. Actua nas áreas de
Engenharia e Tecnologia com ênfase em Engenharia Química, Engenharia e Tecnologia com ênfase em Engenharia Médica, Ciências
Médicas com ênfase em Biotecnologia Médica e Engenharia e Tecnologia com ênfase em Nanotecnologia. Nas suas actividades
profissionais interagiu com 67 colaboradores em co-autorias de trabalhos científicos.
|
Visualizações do curriculum [
594
]
|
Página gerada pela Plataforma de Curricula DeGóis promovida pela FCT e pelo Gávea/DSI/UM
em
13-05-2016
às
22:25:30
|
Plataforma de Curricula DeGóis: http://www.degois.pt | Icons by Axialis Team |
|