Carlos Manuel Coutinho Tavares de Pinho Publicou 21 artigos em revistas especializadas. Actua na área de Engenharia Mecânica Nas suas actividades profissionais interagiu com 28 colaboradores em co-autorias de trabalhos científicos.
Endereço de acesso a este CV: http://www.degois.pt/visualizador/curriculum.jsp?key=0825889050873144

Nome completo Full name	Carlos Manuel Coutinho Tavares de Pinho
Nome em citações bibliográficas Quoting name	Pinho, Carlos Manuel Coutinho Tavares de
Domínio científico de atuação Scientific domain	Engenharia e Tecnologia-Engenharia Mecânica.

Endereço profissional Professional address

Universidade do Porto Faculdade de Engenharia Centro de Estudos de Fenómenos de Transporte Rua Dr. Roberto Frias, s/n Porto 4200-465 Porto Portugal Telefone: (+351)225081747 Correio electrónico: ctp@fe.up.pt

Sexo Gender

Masculino»Male

2010	Agregação Aggregation
Universidade do Porto, Portugal.

1980-1984	Doutoramento Phd
Engenharia Mecânica (5 anos » years) . Universidade do Porto, Portugal.

1971-1976	Licenciatura Licentiate degree
Engenharia Mecânica (5 anos » years) . Universidade do Porto, Portugal.

Compreende Understandig	Inglês (Bem), Francês (Bem).
Fala Speaking	Inglês (Bem), Francês (Bem).
Lê Reading	Inglês (Bem), Francês (Bem).
Escreve Writing	Inglês (Bem), Francês (Bem).

Artigos em revistas com arbitragem científica Papers in periodics with scientific refereeing

1.	Pereira, C.C.; Pinho, C.. 2014. "Influence of particle fragmentation and non-sphericity on the determination of diffusive and kinetic fluidized bed biochar combustion data", Fuel 131, 131: 77 - 88.

Artigos em revistas sem arbitragem científica Papers in periodics without scientific refereeing

1.	Pereira, Carlos C; Pinho, Carlos. 2013. "Determination of Fluidized Bed Combustion Kinetic and Diffusive Data of Four Wood Chars from the Central Region of Portugal", Energy & Fuels 27, 12: 7521 - 7530.

2.	Pinho, Carlos. 2013. "Theoretical Considerations about the Steady State Combustion of Wood Char in a Bubbling Fluidized Bed Reactor", Energy and Power Engineering 05, 03: 212 - 224.

3.	Neto, Paula; Ribeiro, Albina M; Pinho, Carlos. 2012. "Study on Heat Transfer from a Bubbling Fluidized Bed Combustor to a Membrane Wall", International Journal of Chemical Reactor Engineering 10, 1: 1 - 23.

4.	Pinho, Carlos. 2012. "The positive displacement method for calibration of gas flow meters. The influence of gas compressibility", Applied Thermal Engineering 41, -: 111 - 115.

5.	Ramos, Marcelo; Rangel, Nelson; Pinho, Carlos. 2012. "Fluidized-Bed Combustion of Selected Wood Chars from the Semi-arid Northeastern Region of Brazil", Energy & Fuels 26, 1: 400 - 406.

6.	Falcão, D.S.; Gomes, P.J.; Oliveira, V.B.; Pinho, C.; Pinto, A.M.F.R.. 2011. "1D and 3D numerical simulations in PEM fuel cells", International Journal of Hydrogen Energy 36, 19: 12486 - 12498.

7.	Rangel, N.; Pinho, C.. 2011. "Kinetic and diffusive data from batch combustion of wood chars in fluidized bed", Biomass and Bioenergy 35, 10: 4124 - 4133.

8.	Rangel, Nelson; Pinho, Carlos. 2010. "Fragmentation Effect on Batches of Pine Wood Char Burning in a Fluidized Bed", Energy & Fuels 24, 1: 318 - 323.

9.	Falcão, D.S.; Oliveira, V.B.; Rangel, C.M.; Pinho, C.; Pinto, A.M.F.R.. 2009. "Water transport through a PEM fuel cell: A one-dimensional model with heat transfer effects", Chemical Engineering Science 64, 9: 2216 - 2225.

10.	Falca~o, D. S; Rangel, C. M; Pinho, C.; Pinto, A. M. F. R. 2009. "Water Transport through a Proton-Exchange Membrane (PEM) Fuel Cell Operating near Ambient Conditions: Experimental and Modeling Studies", Energy & Fuels 23, 1: 397 - 402.

11.	Neto, P.; Ribeiro, A. M; Pinho, C.. 2009. "Splash and Disengagement Zone Heat Transfer in a Propane-Burning Fluidized Bed", Experimental Heat Transfer 22, 2: 73 - 86.

12.	Magalhães, Ana; Pinho, Carlos. 2008. "Spouted bed drying of cork stoppers", Chemical Engineering and Processing: Process Intensification 47, 12: 2395 - 2401.

13.	Paiva, João M; Pinho, Carlos; Figueiredo, Rui. 2008. "INFLUENCE OF THE DISTRIBUTOR PLATE AND OPERATING CONDITIONS ON THE FLUIDIZATION QUALITY OF A GAS FLUIDIZED BED", Chemical Engineering Communications 196, 3: 342 - 361.

14.	Ribeiro, Leonardo; Pinho, Carlos. 2008. "A SIMPLE APPROACH TO NUMERICAL MODELING OF PROPANE COMBUSTION IN FLUIDIZED BEDS", Chemical Engineering Communications 196, 3: 305 - 329.

15.	Ribeiro, L.; Pinho, C.. 2007. "Combustion of slugs of propane and air moving up through an incipiently fluidized bed", Combustion Theory and Modelling 11, 3: 401 - 425.

16.	PILAO, R; RAMALHO, E; Pinho, C.. 2006. "Overall characterization of cork dust explosion", Journal of Hazardous Materials 133, 1-3: 183 - 195.

17.	Pilão, R.; RAMALHO, E; Pinho, C.. 2006. "Explosibility of cork dust in methane/air mixtures", Journal of Loss Prevention in the Process Industries 19, 1: 17 - 23.

18.	Pinho, Carlos. 2006. "Fragmentation on batches of coke or char particles during fluidized bed combustion", Chemical Engineering Journal 115, 3: 147 - 155.

19.	Pilão, R.; RAMALHO, E; Pinho, C.. 2004. "Influence of initial pressure on the explosibility of cork dust/air mixtures", Journal of Loss Prevention in the Process Industries 17, 1: 87 - 96.

20.	PILAO, R; RAMALHO, E; Pinhoinst, C.. 2002. "Influence of initial pressure on cork dust/air mixtures explosibility", Journal de Physique IV (Proceedings) 12, 7: 53 - 63.

Produção científica Scientific production

Total

Produção científica Scientific production

21

Artigos científicos em revistas Papers in periodics

21

Com arbitragem científica With scientific refereeing

1

Sem arbitragem científica Without scientific refereeing

20

Carmen Mireya Rangel