Curriculum Vitae

Armando José Pinheiro Marques Pires

Data da última atualização »Last update : 15/05/2018


Armando José Pinheiro Marques Pires. Concluiu a Agregação - em 2006. É Professor Coordenador Principal no Instituto Politécnico de Setúbal. Publicou 22 artigos em revistas especializadas e 80 trabalhos em actas de eventos, possui 8 capítulos de livros e 2 livros publicados. Actua na área de Engenharia e Tecnologia com ênfase em Engenharia Electrotécnica, Electrónica e Informática. Nas suas actividades profissionais interagiu com 75 colaboradores em co-autorias de trabalhos científicos. No seu curriculum DeGóis os termos mais frequentes na contextualização da produção científica, tecnológica e artístico-cultural são: Redes de distribuição, short-term load forecasting, inductive reactive power e neural nets.


Endereço de acesso a este CV:

http://www.degois.pt/visualizador/curriculum.jsp?key=6859274899674561


Dados pessoais (Personal data)
Nome completo
Full name
Armando José Pinheiro Marques Pires
Nome em citações bibliográficas
Quoting name
A. J. Pires
Categoria profissional
Position
Professor Coordenador Principal
Domínio científico de atuação
Scientific domain
Engenharia e Tecnologia-Engenharia Electrotécnica, Electrónica e Informática.
Endereço profissional
Professional address
Instituto Politécnico de Setúbal
Campus do IPS, Estefanilha
Setúbal
2910-761 Setúbal
Portugal
Telefone: (+351)265790000
Fax: (+351)265721869
Correio electrónico: armando.pires@estsetubal.ips.pt
Sexo
Gender
Masculino»Male




Graus Académicos (Academic Degrees)
2006 Agregação
Aggregation
Universidade de Évora, Portugal.

1989-1994 Doutoramento
Phd
Doutoramento em Engenharia Electrotécnica e de Computadores.
Universidade Técnica de Lisboa, Portugal.

1985-1988 Mestrado
Master degree
Mestrado em Engenharia Electrotécnica e de Computadores (1,5 anos » years) .
Universidade Técnica de Lisboa, Portugal.

1980-1985 Licenciatura
Licentiate degree
Licenciatura em Engenharia Electrotécnica (5 anos » years) .
Universidade Técnica de Lisboa, Portugal.





Formação complementar ( studies)
2015-2015 Curso de curta duração
Short course
Curso PBL (formação pedagógica).
Instituto Politécnico de Setúbal, Portugal.

2007-2008 Especialização/ Pós-Graduação
Specialization/ Postgraduation
Pós-Graduação em Gestão Estratégica de Universidades .
Universitat Politecnica de Catalunya, Espanha.





Vínculos profissionais (Professional Positions)
Agência de Avaliação e Acreditação do Ensino Superior
Jul/2016-Actual Outra Situação

UNIVERSITIES OF APPLIED SCIENCES NETWORK
Jul/2016-Actual Outra Situação

EUROPEAN ASSOCIATION OF INSTITUTIONS IN HIGHER EDUCATION
Abr/2016-Actual Outra Situação

Conselho Coordenador dos Institutos Superiores Politécnicos
Mai/2014-Actual Outra Situação

Centre of Technology and Systems | UNINOVA
Jan/2007-Actual Outra Situação

Instituto Politécnico de Setúbal
Jul/2011-Actual Professor Coordenador Principal
Dez/2006-Jul/2011 Professor Coordenador com Agregação

Instituto Politécnico de Setúbal
Dez/1994-Nov/2006 Professor Coordenador





Atividades de Ensino (Teaching activities)


Instituto Politécnico de Setúbal
Set/2017-Fev/2018
Disciplinas lecionadas»Taught units:

  • Dinâmica de Máquinas Elétricas - Aulas Teórico-Práticas (2,5h/semana, noturno) e de Laboratório (2,5h/semana, noturno); Curso: Mestrado em Engenharia Eletrotécnica e Computadores(Regente)
  • Eletrotecnia - Aulas Teórico-Práticas (3h/semana, diurno) e de Laboratório (2h/semana, 2 turmas (6 aulas), diurno); Curso: Licenciatura em Engenharia de Automação, Controlo e Instrumentação(Regente)


Fev/2017-Jul/2017
Disciplinas lecionadas»Taught units:

  • Acionamentos Eletromecânicos - Aulas Teórico-Práticas (3h/semana) e de Laboratório (2h/semana); Curso: Licenciatura em Engenharia Eletrotécnica e Computadores(Regente)
  • Eletrotecnia - Aulas Teórico-Práticas (2h/semana) e de Laboratório (2h/semana); Curso: TeSP em Tecnologia e Gestão Automóvel(Regente)
  • Eletrotecnia - Aulas de Laboratório (2h/semana, 2 turmas); Cursos: Licenciatura em Engenharia Mecânica e Licenciatura em Tecnologia Biomédica(Docente)


Set/2016-Fev/2017
Disciplinas lecionadas»Taught units:

  • Dinâmica de Máquinas Elétricas - Aulas Tutoriais (1h/semana); Curso: Mestrado em Engenharia Eletrotécnica e Computadores(Regente)
  • Eletrotecnia - Aulas Teórico-Práticas (3h/semana, diurno e noturno) e de Laboratório (2h/semana, noturno); Curso: Licenciatura em Engenharia de Automação, Controlo e Instrumentação(Regente)


Fev/2016-Jul/2016
Disciplinas lecionadas»Taught units:

  • Acionamentos Eletromecânicos - Aulas Teórico-Práticas (3h/semana) e de Laboratório (2h/semana); Curso: Licenciatura em Engenharia Eletrotécnica e Computadores(Regente)
  • Eletrotecnia - Aulas Teórico-Práticas (2h/semana, 2 turmas) e de Laboratório (2h/semana, 2 turmas); Cursos: TeSP em Tecnologia e Gestão Automóvel; TeSP em Manutenção Industrial(Regente)


Set/2015-Fev/2016
Disciplinas lecionadas»Taught units:

  • Eletrotecnia I - Aulas de Laboratório (2h/semana, 4 turmas); Cursos: Licenciatura em Engenharia Eletrotécnica e Computadores (2 turmas), Licenciatura em Tecnologias de Energia (2 turmas)(Docente)






Atividades de Direção e Administração (Management and Administration activities)
Agência de Avaliação e Acreditação do Ensino Superior
Jul/2016-Actual
- Membro não Executivo do Conselho de Administração


UNIVERSITIES OF APPLIED SCIENCES NETWORK
Jul/2016-Actual
- Outro (membro do Steering Committee)


EUROPEAN ASSOCIATION OF INSTITUTIONS IN HIGHER EDUCATION
Abr/2016-Actual
- Vice-Presidente


Abr/2015-Actual
- Outro (Coordenador do Working Group RDI)




Instituto Politécnico de Setúbal
Mar/2006-Abr/2014
- Presidente






Projetos de Investigação (Research projects)
Participação como Investigador responsável
Participation as responsible Researcher
2016-2018
Internacionalização do Ensino Superior Politécnico Português
Referência do projeto»Project reference: 02/SIAC/2015.
POCI/FEDER


Participação como Investigador
Participation as Researcher
2016-
Supporting Apprenticeships between Professional Higher Education & Small and Medium Enterprises
Referência do projeto»Project reference: SAPS.
ERASMUS+ KA3

2016-2018
Key technologies research and develop on novel cylinder linear generator system for ocean wave power generation
Referência do projeto»Project reference: Acordo Coop Científ Por/China.
Acordo de Cooperação Científica e Tecnológica entre Portugal e China

2015-2018
NOBELGRID – “New Cost Efficient Business Models for Flexible Smart Grids
Referência do projeto»Project reference: H2020-LCE-2014-3/646184.

2015-2018
Enhancing Quality through Innovative Policy & Practice
Referência do projeto»Project reference: EQUIP.
ERASMUS+ KA3






Produção científica, técnica e artística/cultural (Scientific, technical and artistical/cultural production)
Livros publicados/organizados ou edições
Published/organized books or Editions
1. Pires, A. J. ed. 2006. Colecção Investigação – Vol. II – Projectos de Investigação IPS ed. 1, 1 vol., ISBN: 972-8431-26-0. Setúbal: Instituto Politécnico de Setúbal.
2. Pires, A. J. ed. 2001. Colecção Investigação - Vol. I – Projectos de Investigação IPS ed. 1, 1 vol., ISBN: 972-8431-14-7. Setúbal: Instituto Politécnico de Setúbal.

Capítulos de livros publicados
Published book chapters
1. Amaral, T. G; Pires, V. F; Martins, J. F; Pires, A. J; Crisóstomo, M. M. 2009. Image Processing Based Classifier for Detection and Diagnosis of Induction Motor Stator Fault.  In Image Processing, ed. Yung-Sheng Chen , 0 - 0. ISBN: 978-953-307-026-1. Alemanha: INTECH.
2. Martins, João; Rangel, Carmen M; Joyce, António; Sottomayor, João; Pires, Armando; Castro, Rui. 2009. RenH2 – A Stand-Alone Sustainable Renewable Energy System.  In Renewable Energy, ed. T.J. Hammons , 0 - 0. ISBN: 978-953-7619-52-7. Alemanha: INTECH.
3. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2006. Performance of a Four Phase Switched Reluctance Motor Speed Control Based on an Adaptive Fuzzy System: Experimental Tests, Analysis and Conclusions.  In Apllied Soft Computing Technologies: The Challenge of Complexity, 581 - 599. ISBN: 3-540-31649-3. Alemanha: Springer.
4. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2005. Entropy Analysis for the Language Modeling of Electrical Drives.  In Intelligent Systems at the Service of Mankind, 53 - 62. ISBN: 3-86608-052-2. Alemanha: Ubooks.
5. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2004. Automatic Language Control of Electrical Drives. Background and Applications.  In Intelligent Systems at the Service of Mankind, 29 - 40. ISBN: 3-935798-25-3. Alemanha: Ubooks.
6. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2001. Modelling Electromechanical Drive Systems: A Formal Language Approach.  In Mechatronic Systems, 769 - 774. ISBN: 0-08-043551 3. Reino Unido: Pergamon.
7. Pires, A. J; Campion, G.; Garrido, M. S. 1991. Control of Saturated Induction Motors by the Input-Output Linearization Method.  In Modelling and Control of Electrical Machines, ed. New Trends, R.Le Doeuff e J.Robert , 153 - 158. . Países Baixos: Elsevier Science Publishers B.V. .
8. Pires, A. J; Gudefin, E.; Garrido, M. S. 1989. Dynamic Model of Triangular-wave Brushless Exciters.  In Electrical and Power Systems - modelling and simulation, ed. J.Robert, W.Midvidy , 137 - 139. . Países Baixos: J.C.Baltzer AG, Scientific Publishing .

Artigos em revistas com arbitragem científica
Papers in periodics with scientific refereeing
1. Lobato, Pedro; Dente, Joaquim A; Martins, João F; Pires, Armando J. 2015. "Scale models formulation of switched reluctance generators for low speed energy converters", IET Electric Power Applications 9, 9: 652 - 659.
2. Rafael, Silviano; Branco, P.J. C; Pires, A.J.. 2015. "Sliding mode angular position control for an 8/6 Switched Reluctance Machine: Theoretical concept, design and experimental results", Electric Power Systems Research 129, -: 62 - 74.
3. Pires, V. F; Kadivonga, Manuel; Martins, J.F.; Pires, A.J.. 2013. "Motor square current signature analysis for induction motor rotor diagnosis", Measurement 46, 2: 942 - 948.
4. Pires, V. F; Martins, J. F; Pires, A. J. 2010. "Eigenvector/eigenvalue analysis of a 3D current referential fault detection and diagnosis of an induction motor", Energy Conversion and Management , 51: 901 - 907.
5. Rodrigues, A. L; Pires, A. J. 2009. "Reluctance machines incorporating high temperature superconducting materials on the rotor", Physica C, 470: 98 - 103.
6. Santos, P. J; Martins, A. G; Pires, A. J. 2008. "Next hour load forecast in medium voltage electricity distribution.", Special issue of the International Journal of Energy Sector Management devoted to “Operational Research Models and Methods in the Energy Sector". 2, 3: 439 - 448.
ABSTRACT. The short-term load forecast algorithms (STLF), represents a powerful tool to assist electric utilities in activities such as planning, operating and controlling the electric energy systems. Usually the load (kW, kvar, kVA or A), is collected directly from the SCADA system, normally the demand curve is broken into equal’s time intervals, this discrete sequence of average values represent the load time series (LTS). The LTS have a certain periodicities, has a daily cycle, related to the regular consumption habits, and a seasonal variation caused by the climatic influences. Despite this cyclical behaviour, STLF represents a complex task, usually solved by methodological approaches based on regressive methods. The explanatory variables are normally grouped in two major classes, endogenous and exogenous variables. In the STLF, the endogenous variables most used are the load values in the past instants. The temperature is also used, in some regions, with a certain climatic conditions, the correlation coefficient between temperature and consumption may be strong, particularly when high humidity and temperature are current in summer, or very low temperatures occur in winter. In this case study, moderate temperature swings are accompanied by also moderate humidity conditions. Hence, a strong correlation was not expected, particularly because short-term forecasts were sought. To deal with the increasing of load during the winter, it was used the forecast average daily temperature to predict the day load average. This information brings more accuracy to the next hour load forecast in this particularly case. It was also used the trend concept of load evolution, based on the behavior of homologous periods. This methodological approach based on artificial neural networks an it was tested in a real case study. .

7. Pires, Dulce F; Pires, V. F; Martins, J. F; Pires, A. J. 2008. "Rotor Cage Fault Diagnosis in Three-Phase Induction Motors Based on a Current and Virtual Flux Approach", Energy Conversion and Management, 50(4): 1026 - 1032.
8. Martins, J. F; Dente, J. A; Pires, A. J; Mendes, R. V. 2008. "From controlled dynamical systems to context-dependent grammars: A connectionist approach", International Journal of Engineering Applications of Artificial Intelligence, 2(22): 192 - 200.
9. Martins, J. F; Santos, P. J; Pires, A. J; Silva, L. E. B.; Mendes, R. V. 2007. "Entropy Based Choice of a Neural Network Drive Model", IEEE Transactions on Industrial Electronics 54, 1: 110 - 116.
ABSTRACT The design of a neural network requires, among other things, a proper choice of input variables, avoiding over fitting and an unnecessarily complex input vector. This may be achieved by trying to reduce the arbitrariness in the choice of the input layer. This paper discusses the relation between the memory range of a particular controlled dynamical system (induction drive) and the dimension of the neural network input vector. Mathematical techniques of process-reconstruction of the underlying process, using coding and block entropies to characterize the measure and memory range were applied. These modeling techniques provide a precise knowledge of the drive dynamics, a fundamental requirement in modern control approaches.

10. Santos, P. J; Martins, A. G; Pires, A. J. 2007. "Designing the input vector to ANN-based models for short-term load forecast in electricity distribution systems", International Journal of Electrical Power & Energy Systems 29, 4: 338 - 347.
Abstract The present trend to electricity market restructuring increases the need for reliable short-term load forecast (STLF) algorithms, in order to assist electric utilities in activities such as planning, operating and controlling electric energy systems. Methodologies such as artificial neural networks (ANN) have been widely used in the next hour load forecast horizon with satisfactory results. However, this type of approach has had some shortcomings. Usually, the input vector (IV) is defined in a arbitrary way, mainly based on experience, on engineering judgment criteria and on concern about the ANN dimension, always taking into consideration the apparent correlations within the available endogenous and exogenous data. In this paper, a proposal is made of an approach to define the IV composition, with the main focus on reducing the influence of trial-and-error and common sense judgments, which usually are not based on sufficient evidence of comparative advantages over previous alternatives. The proposal includes the assessment of the strictly necessary instances of the endogenous variable, both from the point of view of the contiguous values prior to the forecast to be made, and of the past values representing the trend of consumption at homologous time intervals of the past. It also assesses the influence of exogenous variables, again limiting their presence at the IV to the indispensable minimum. A comparison is made with two alternative IV structures previously proposed in the literature, also applied to the distribution sector. The paper is supported by a real case study at the distribution sector.

11. Martins, J. F; Pires, V. F; Pires, A. J. 2007. "Unsupervised Neural-Network Based Algorithm for an On-Line Diagnosis of Three-Phase Induction Motor Stator Fault", IEEE Transactions on Industrial Electronics  54, 1: 259 - 264.
12. Santos, P. J; Martins, A. G; Pires, A. J; Martins, J. F; Mendes, R. V. 2006. "Short-term Load Forecast Using Trend Information and Process Reconstruction", International Journal of Energy Research 30, 10: 811 - 822.
Abstrac The algorithms for short-term load forecast (STLF), especially within the next-hour horizon, belong to a group of methodologies that aim to render more effective the actions of planning, operating and controlling electric energy systems (EES). In the context of the progressive liberalization of the electricity sector, unbundling of the previous monopolistic structure emphasizes the need for load forecast, particularly at the network level. Methodologies such as artificial neural networks (ANN) have been widely used in next-hour load forecast. Designing an ANN requires the proper choice of input variables, avoiding overfitting and an unnecessarily complex input vector (IV). This may be achieved by trying to reduce the arbitrariness in the choice of endogenous variables. At a first stage, we have applied the mathematical techniques of process-reconstruction to the underlying stochastic process, using coding and block entropies to characterize the measure and memory range. At a second stage, the concept of consumption trend in homologous days of previous weeks has been used. The possibility to include weather-related variables in the IV has also been analysed, the option finally being to establish a model of the non-weather sensitive type. The paper uses a real-life case study. Copyright © 2006 John Wiley & Sons, Ltd.

13. Pires, A. J; Martins, J. F; Branco, P. J; Dente, J. A. 2006. "An Average Values Global Model for the Switched Reluctance Machine", Transactions of IMACS on Mathematics and Computers in Simulation, Special Issue on Modeling and Simulation of Electric Machines, Converters and Systems 71, 4-6: 466 - 475.
14. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2006. "An On-Line Learning Speed Controller for a Switched Reluctance Machine; Design, Dynamic Problems and Solutions", WSEAS Transactions on Power Systems 1, 1: 266 - 273.
15. Parreira, B.; Rafael, S.; Pires, A. J; Branco, P. J. C. 2005. "Obtaining the Magnetic Characteristics of an 8/6 Switched Reluctance Machine: from FEM Analysis to the Experimental Tests", IEEE Transactions on Industrial Electronics 52, 6: 1635 - 1643.
16. Pires, V. F; Silva, J. F; Pires, A. J. 2004. "Fixed-frequency active current controller and low-sensitivity voltage regulator for a voltage-sourced buck-boost type rectifier", European Transactions on Electrical Power , 14: 223 - 233.
17. Pires, Armando J; Rodrigues, Vitor T. 2004. "The ICT in the Polytechnic Institute of Setúbal – The Beginning of a New Phase", Journal on Systemics, Cybernetics and Informatics  2, 1: 0 - 0.
18. Martins, A. G; Santos, P. J; Pires, A. J. 2003. "On the use of reactive power as an endogenous variable in short-term load forecasting", International Journal of Energy Research, 27: 513 - 529.
Abstract In the last decades, short-term load forecasting(STLF) has been the object of particular attention in the power systems field. STLF has been applied almost exclusively to the generation sector, based on variables, which are transversal to most models. Among the most significant variables we can find load, expressed as active power (MW), as well as exogenous variables, such as weather and economy-related ones; although the latter are applied in larger forecasting horizons than STLF. In this paper, the application of STLF to the distribution sector is suggested including inductive reactive power as a forecasting endogenous variable. The inclusion of this additional variable is mainly due to the evidence that correlations between load and weather variables are tenuous, due to the mild climate of the actual case-study system and the consequent feeble penetration of electrical heating ventilation and air conditioning loads. Artificial neural networks (ANN) have been chosen as the forecasting methodology, with standard feed forward back propagation algorithm, because it is a largely used method with generally considered satisfactory results. Usually the input vector to ANN applied to load forecasting is defined in a discretionary way, mainly based on experience, on engineering judgement criteria and on concern about the ANN dimension, always taking into consideration the apparent (or actually evaluated) correlations within the available data. The approach referred in the paper includes pre-processing the data in order to influence the composition of the input vector in such a way as to reduce the margin of discretion in its definition. A relative entropy analysis has been performed to the time series of each variable. The paper also includes an illustrative case study. Copyright © 2003 John Wiley & Sons, Ltd.

19. Lobato, P.; Pires, A. J; Dente, J. A. 2003. "A New Control Strategy Based On Optimised Smooth-Torque Current Waveforms for Switched Reluctance Motors", Electromotion International Journal – Special Issue: 5th International Symposium on Advanced Electromechanical Motion Systems 10, 4: 579 - 583.
20. Martins, J. F; Dente, J. A; Pires, A. J; Mendes, R. V. 2001. "Language Identification of Controlled Systems: Modelling, Control and Anomaly Detection", IEEE Transactions on Systems, Man and Cybernetics (Part C) 31, 2: 234 - 242.
21. Martins, J. F; Branco, P. J. C; Pires, A. J; Dente, J. A. 2001. "New Trends in Recognizing Experimental Drives: Fuzzy Logic and Formal Language Theories", IEEE Transactions on Fuzzy Systems - Special Issue of TFS on Recognition Technology 9, 1: 68 - 87.
22. Martins, J. F. A; Pires, A. J; Silva, J. F. 1998. "A Novel and Simple Current Controler for Three-Phase PWM Power Inverters", IEEE Transactions on Industrial Electronics 45, 5: 802 - 805.
23. Branco, P. J. C; Martins, J. F; Pires, A. J; Dente, J. A. 1997. "Recognising patterns in electromechanical systems", Pattern Recognition Letters 18, 11-13: 1335 - 1346.
24. Martins, J. F; Pires, A. J; Dente, J. A. 1997. "Modelização Automática Entrada/Saída de um Motor Assíncrono", Robótica e Automatização , 26: 43 - 48.

Trabalhos completos/resumidos em eventos com arbitragem científica
Papers in conference proceedings with scientific refereeing
1. Antunes, Tiago A; Santos, Paulo J; Pires, Armando J. 2017. "HVAC transmission restrictions in large scale offshore wind farm applications", Trabalho apresentado em 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), In 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Cadiz, Spain.
2. Pires, V. F; Amaral, Tito G; Foito, D.; Pires, A. J. 2017. "Cascaded H-bridge multilevel inverter with a fault detection scheme based on the statistic moments indexes", Trabalho apresentado em 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), In 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Cadiz, Spain.
3. Lobato, Pedro; Dente, Joaquim A; Martins, J. F; Pires, A. J. 2017. "Similarity Laws in Low Speed Switched Reluctance Machines Design", Trabalho apresentado em UPEC017 - 52nd International Universities’ Power Engineering Conference, In Proceedings da Conferência UPEC017 - 52nd International Universities’ Power Engineering Conference, Heraklion.
4. Lobato, Pedro; Dente, Joaquim A; Martins, J. F; Pires, A. J. 2016. "Field-based models for low speed switched reluctance machine designs", Trabalho apresentado em CPE-Powereng, In Proceedings da Conferência CPE-Powereng 2016 - 10th International Conference on Compatibility, Power Electronics and Power Engineering, Bydgoszcz.
5. Pires, V. F; Martins, J. F; Pires, A. J; Rodrigues, A. L. 2016. "Induction Motor Broken Bar Fault Detection Based on MCSA, MSCSA and PCA: A Comparative Study", Trabalho apresentado em CPE-Powereng 2016 - 10th International Conference on Compatibility, Power Electronics and Power Engineering, In Proceedings da Conferência CPE-Powereng 2016 - 10th International Conference on Compatibility, Power Electronics and Power Engineering, Bydgoszcz.
6. Martins, J. F; Pires, A. J; Pires, V. F. 2015. "A new teaching tool to enhance Power Quality assessment", Trabalho apresentado em IEEE-IECON 2015 – 41st Annual Conference of the IEEE Industrial Electronics Society, In Proceedings da Conferência IEEE-IECON 2015 – 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama.
7. Lobato, Pedro; Dente, Joaquim A; Martins, J. F; Pires, A. J. 2015. "Short flux-paths in switched reluctance generators for direct drive wind energy converters", Trabalho apresentado em CPE 2015 - 9th International Conference on Compatibility and Power Electronics, In Proceedings da Conferência CPE 2015 - 9th International Conference on Compatibility and Power Electronics, Caparica, Lisboa.
8. Pires, A. J; Martins, J. F; Pires, V. F; Foito, D.. 2015. "Detection of Stator Winding Fault in Induction Motors Using a Motor Square Current Signature Analysis (MSCSA)", Trabalho apresentado em POWERENG 2015 - 5th International Conference on Power Engineering, Energy and Electrical Drives, In Proceedings da Conferência POWERENG 2015 - 5th International Conference on Power Engineering, Energy and Electrical Drives, Riga.
9. Leite, Eurico; Varela, Luís; Pires, V. F; Cardoso, Filipe D; Pires, A. J; Martins, J. F. 2014. "A ZigBee Wireless Domotic System with Bluetooth Interface", Trabalho apresentado em IEEE-IECON 2014 – 40th Annual Conference of the IEEE Industrial Electronics Society, In Proceedings da Conferência IEEE-IECON 2014 – 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas.
10. Santos, Paulo J; Rafael, S.; Pires, A. J. 2014. "One Day A-Head Electrical Load Peak Forecasting in Electrical Transmission System", Trabalho apresentado em ITISE 2014 – International Work-Conference on Time Series, In Proceedings da Conferência ITISE 2014 – International Work-Conference on Time Series, Granada.
11. Rafael, Silviano; Santos, P. J; Pires, J.. 2013. "An adaptive PID speed controller for an 8/6 switched reluctance machine", Trabalho apresentado em 2013 IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), In 4th International Conference on Power Engineering, Energy and Electrical Drives, Istanbul, Turkey.
12. Santos, P. J; Rafael, S.; Pires, A. J. 2013. "Load forecasting, the importance of the probability “tails” in the definition of the input vector", Trabalho apresentado em 2013 IV International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), In 4th International Conference on Power Engineering, Energy and Electrical Drives, Istanbul, Turkey.
13. Pires, V. F; Martins, J. F; Dias, O. P; Pires, A. J; Hao, Chen. 2012. "A Photovoltaic String Architecture with Multiple Single-Phase Inverter Modules", Trabalho apresentado em BEC 2012 – 13th Biennial Baltic Electronics Conference, In Proceedings da conferência BEC 2012 – 13th Biennial Baltic Electronics Conference, Tallinn.
14. Martins, J. F; Lopes, Rui; Pires, V. F; Pires, A. J; Lima, Celson. 2012. "The Application of S-Transform in Fault Detection and Diagnosis of Grid-Connected Power Inverters", Trabalho apresentado em IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society, In Proceedings da Conferência IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society, Montreal.
15. Martins, J. F; Pires, V. F; Lima, Celson; Pires, A. J. 2012. "Fault Detection and Diagnosis of Grid-Connected Power Inverters using PCA and current mean value", Trabalho apresentado em IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society , In Proceedings da Conferência IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society , Montreal.
16. Rafael, Silviano; Branco, P. J. C; Pires, A. J. 2012. "A Study and Design of a Position Tracking Control for an 8/6 Switched Reluctance Machine", Trabalho apresentado em IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society , In Proceedings da Conferência IEEE-IECON 2012 - 38th Annual Conference of the IEEE Industrial Electronics Society , Montreal.
17. Rafael, Silviano; Branco, P. J. C; Pires, A. J. 2011. "A Low-Cost Shaft Position Tracking Control for an 8/6 Switched Reluctance Machine", Trabalho apresentado em POWERENG, In Proceedings da conferência IEEE-POWERENG 2011 – 3rd International Conference on Power Engineering, Energy and Electrical Drives, Málaga.
18. Lobato, P.; Martins, J. F; Pires, A. J. 2011. "A Design Criteria for Torque Ripple Reduction in Switched Reluctance Generators", Trabalho apresentado em IEEE-POWERENG 2011 – 3rd International Conference on Power Engineering, Energy and Electrical Drives , In Proceedings da conferência IEEE-POWERENG 2011 – 3rd International Conference on Power Engineering, Energy and Electrical Drives , Málaga.
19. Pires, V. F; Pires, A. J; Dias, O. P. 2011. "Self-Learning as a Tool for Teaching Power Electronics", Trabalho apresentado em IEEE-IECON/ICELIE 2011 , In Proceedings da Conferência IEEE-IECON/ICELIE 2011 , Melbourne.
20. Lobato, P.; Rafael, S.; Martins, J.; Pires, A. J. 2010. "Flux-linkage Characteristics Models for Switched Reluctance Machines", Trabalho apresentado em IEEE-IECON 2010 - 36th Annual Conference of the IEEE Industrial Electronics Society, In IEEE-IECON 2010 - 36th Annual Conference of the IEEE Industrial Electronics Society, Phoenix.
21. Santos, P. J; Rafael, S.; Lobato, P.; Pires, A. J. 2009. "A STLF in distribution systems – A short comparative study between ANFIS Neuro-Fuzzy and ANN approaches – Part I", Trabalho apresentado em POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives , In POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives , Lisboa.
22. Rafael, S.; Santos, P.; Lobato, P.; Pires, A. J. 2009. "A STLF in distribution systems – A short comparative study between ANFIS Neuro-Fuzzy and ANN approaches – Part II", Trabalho apresentado em POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives, In POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives, Lisboa.
23. Rafael, Silviano; Branco, P. J. C; Pires, A. J. 2009. "Position Control of a 8/6 Switched Reluctance Machine without Current Sensor", Trabalho apresentado em POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives, In POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives, Lisboa.
24. Lobato, P.; Rafael, S.; Santos, P.; Pires, A. J. 2009. "Magnetic Characteristics Modelling for Regular Switched Reluctance Machines: Analytical and FEM Approaches", Trabalho apresentado em POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives , In POWERENG 2009 – 2nd International Conference on Power Engineering, Energy and Electrical Drives , Lisboa.
25. Janeiro, Fernando M; Martins, João; Pires, V. F; Ramos, Pedro M; Pires, A. J. 2008. "Induction Motor Broken Bars Online Detection", Trabalho apresentado em IEEE Instrumentation and Measurement Technology Conference (IMTC 2008) , In IEEE Instrumentation and Measurement Technology Conference (IMTC 2008) , Victoria.
26. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2007. "Shaft Position for an 8/6 Switched Reluctance Machine: Theoretical concept, FEM analysis and Experimental results", Trabalho apresentado em PEDS’07 - 7th International Conference on Power Electronics and Drive Systems, In PEDS’07 - 7th International Conference on Power Electronics and Drive Systems, Bangkok.
27. Martins, J. F; Pires, V. F; Pires, A. J. 2007. "On-Line Diagnosis of Three-Phase Closed Loop Induction Motor Drives Using an Eigenvalue aß–Vector Approach", Trabalho apresentado em PEDS’07 - 7th International Conference on Power Electronics and Drive Systems, In PEDS’07 - 7th International Conference on Power Electronics and Drive Systems, Bangkok.
28. Rafael, Silviano; Branco, P. J. C; Pires, A. J. 2007. "Study and Analysis of the Switched Reluctance Machine Shaft Position", Trabalho apresentado em IEEE-IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society, In IEEE-IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society, Taipé.
29. Amaral, T. G; Pires, V. F; Martins, J. F; Pires, A. J; Crisóstomo, M. M. 2007. "Image Processing to a Neuro-Fuzzy Classifier for Detection and Diagnosis of Induction Motor Stator Fault", Trabalho apresentado em IEEE-IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society , In IEEE-IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society , Taipé.
30. Lobato, P.; Rafael, S.; Pires, A. J. 2007. "Obtaining the Flux-Linkage Characteristic of an 8/6 Switched Reluctance Machine: FEM Modelling and Analytical Functions Approach", Trabalho apresentado em ISEF 2007 - XIII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, In ISEF 2007 - XIII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Praga.
31. Lobato, P.; Rafael, S.; Pires, A. J. 2007. "Magnetic Characteristics Model for an 8/6 Switched Reluctance Machine: Analytical Function Approach from Experimental Tests", Trabalho apresentado em IEEE Region 8 EUROCON 2007 International Conference “Computer as a Tool”, In IEEE Region 8 EUROCON 2007 International Conference “Computer as a Tool”, Varsóvia.
32. Martins, J. F; Joyce, António; Rangel, Carmen; Sottomayor, João; Castro, Rui; Pires, Armando; Carvalheiro, João; Silva, Raquel A; Viana, Susana. 2007. "RenH2 – Stand-Alone Energy System Supported by Totally Renewable Hydrogen Production", Trabalho apresentado em POWERENG 2007 International Conference on Power Engineering, Energy and Electrical Drives , In POWERENG 2007 International Conference on Power Engineering, Energy and Electrical Drives , Setúbal.
33. Amaral, Tito G; Pires, V. F; Martins, J. F; Pires, A. J; Crisóstomo, Manuel M. 2007. "Statistic Moment Based Method for the Detection and Diagnosis of Induction Motor Stator Fault", Trabalho apresentado em POWERENG 2007 International Conference on Power Engineering, Energy and Electrical Drives, In POWERENG 2007 International Conference on Power Engineering, Energy and Electrical Drives, Setúbal.
34. Santos, P. J; Martins, A. G; Pires, A.. 2006. "Next hour load forecast in medium voltage electricity distribution", Trabalho apresentado em ORMMES'06 19th Mini EURO Conference on Operational Research Models and Methods in the Energy Sector, In ORMMES'06 19th Mini EURO Conference on Operational Research Models and Methods in the Energy Sector, Coimbra.
35. Martins, J. F; Pires, V. F; Pires, A. J. 2006. "PCA-Based On-Line Diagnosis of Induction Motor Stator Fault Feed by PWM Inverter", Trabalho apresentado em IEEE-ISIE 2006 – International Symposium on Industrial Electronics , In IEEE-ISIE 2006 – International Symposium on Industrial Electronics , Montreal.
36. Rafael, Silviano; Pires, A. J; Branco, P. J. 2005. "Implementation of two error compensating methods for an On-Line Learning Speed Controller for a Switched Reluctance Machine", Trabalho apresentado em 5th WSEAS / IASME International Conference on ELECTRIC POWER SYSTEMS, HIGH VOLTAGES, ELECTRIC MACHINES (POWER'05), In 5th WSEAS / IASME International Conference on ELECTRIC POWER SYSTEMS, HIGH VOLTAGES, ELECTRIC MACHINES (POWER'05), Tenerife.
37. Santos, P. J; Martins, A. G; Pires, A. J. 2005. "A previsão de cargas no curto-prazo em sistemas de distribuição", Trabalho apresentado em CLAGTEE 2005 - VI Congreso Latinoamericano de Generacion y Transporte de Energia Electrica , In CLAGTEE 2005 - VI Congreso Latinoamericano de Generacion y Transporte de Energia Electrica , Mar del Plata.
38. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2005. "A Neuro-Fuzzy Multilayer Weights Approach for an On-Line Learning Speed Controller applied to a Switched Reluctance Machine: why and how to use it", Trabalho apresentado em EPE 2005 - 11th European Conference on Power Electronics and Applications, In EPE 2005 - 11th European Conference on Power Electronics and Applications, Dresden.
39. Martins, J. F; Pires, A. J. 2005. "Comparison of low frequency hysteresis current control power inverters with accurate selection of applied vectors - two and three level comparators", Trabalho apresentado em EPE 2005 - 11th European Conference on Power Electronics and Applications, In EPE 2005 - 11th European Conference on Power Electronics and Applications, Dresden.
40. Chaínho, João; Pereira, Pedro; Rafael, Silviano; Pires, A. J. 2005. "A Simple PID Controller with Adaptative Parameter in a DSPIC – Case of Study", Trabalho apresentado em 9CHLIE - 9th Spanish Portuguese Congress on Electrical Engineering, In 9CHLIE - 9th Spanish Portuguese Congress on Electrical Engineering, Marbella.
41. Lobato, Pedro; Cruz, A.; Silva, J.; Pires, A. J. 2005. "The Switched Reluctance Generator for Wind Power Conversion", Trabalho apresentado em 9CHLIE - 9th Spanish Portuguese Congress on Electrical Engineering, In 9CHLIE - 9th Spanish Portuguese Congress on Electrical Engineering, Marbella.
42. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2005. "An Adaptive Learning Rate Approach For An On-Line Neuro-Fuzzy Speed Controller Applied To A Switched Reluctance Machine", Trabalho apresentado em IEEE-ISIE 2005 – International Symposium on Industrial Electronics, In IEEE-ISIE 2005 – International Symposium on Industrial Electronics, Dubrovnik.
43. Pires, V. F; Martins, J. F; Pires, A. J. 2005. "On-Line Diagnosis Of Three-Phase Induction Motor Using An Eigenvalue aß-vector Approach", Trabalho apresentado em IEEE-ISIE 2005 – International Symposium on Industrial Electronics , In IEEE-ISIE 2005 – International Symposium on Industrial Electronics , Dubrovnik.
44. Martins, J. F; Santos, P. J; Pires, A. J. 2005. "Synchronous Motor Drive Modeling Using Entropy–Based Process Reconstruction", Trabalho apresentado em IEEE-ISIE 2005 – International Symposium on Industrial Electronics , In IEEE-ISIE 2005 – International Symposium on Industrial Electronics , Dubrovnik.
45. Lobato, Pedro J; Cruz, A.; Silva, J.; Pires, A. J. 2005. "O Gerador Eléctrico de Relutância Comutada como Alternativa aos Geradores Clássicos nos Aproveitamentos de Energia Eólica", Trabalho apresentado em ICIIEM’05 – 1st International Congress Energy and Environment Engineering and Management, In ICIIEM’05 – 1st International Congress Energy and Environment Engineering and Management, Portalegre.
46. Santos, José; Janeiro, Fernando; Martins, J. F; Pires, A. J. 2005. "Simulador de Carga Mecânica, em Tempo Real, para Accionamento Eléctrico", Trabalho apresentado em ICIIEM’05 – 1st International Congress Energy and Environment Engineering and Management, In ICIIEM’05 – 1st International Congress Energy and Environment Engineering and Management, Portalegre.
47. Pires, A. J; Martins, J. F; Branco, P. J; Dente, J. A. 2005. "An Average Values Global Model for the Switched Reluctance Machine", Trabalho apresentado em ELECTRIMACS 2005 – 8th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, In ELECTRIMACS 2005 – 8th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Hammamet.
48. Pires, Armando; Lopes, Andreia G. 2005. "A Formação Superior em Engenharia em Portugal – Caracterização no Contexto de Bolonha", Trabalho apresentado em V ENCUENTRO IBEROAMERICANO DE INSTITUCIONES DE ENSEÑANZA DE LA INGENIERÍA “La ASIBEI y la Práctica de la Enseñanza de la Ingeniería en el Mundo” , In V ENCUENTRO IBEROAMERICANO DE INSTITUCIONES DE ENSEÑANZA DE LA INGENIERÍA “La ASIBEI y la Práctica de la Enseñanza de la Ingeniería en el Mundo” , Morelia.
49. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2004. "Performance of a Four Phase Switched Reluctance Motor Speed Control Based On an Adaptive Fuzzy System: Experimental Tests, Analysis and Conclusions", Trabalho apresentado em 9th Online World Conference on Soft Computing in Industrial Applications (WSC 9), In 9th Online World Conference on Soft Computing in Industrial Applications (WSC 9), online.
50. Pires, A. J; Martins, J. F; Branco, P. J; Dente, J. A. 2004. "A Model for the Switched Reluctance Machine with Global Parameters and Global Variables", Trabalho apresentado em CBA2004 – XV Brazilian Automation Congress , In CBA2004 – XV Brazilian Automation Congress , Gramado.
51. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2004. "Metodologia de Parametrização de um Controlador Neuro-Fuzzy de Velocidade para uma Máquina de Relutância Variável", Trabalho apresentado em CBA2004 – XV Brazilian Automation Congress, In CBA2004 – XV Brazilian Automation Congress, Gramado.
52. Lobato, P.; Pires, A. J; Dente, J. A. 2004. "Network Operating Characteristics Based on Imposed MMF Waveforms for Switched Reluctance Generators", Trabalho apresentado em EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference, In EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference, Riga.
53. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2004. "Implementation of an On-Line Learning Speed Controller for a Switched Reluctance Machine", Trabalho apresentado em EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference , In EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference , Riga.
54. Martins, João F; Rafael, Silviano; Pires, A. J. 2004. "Formal Language Modelling of a Switched Reluctance Machine", Trabalho apresentado em EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference , In EPE-PEMC 2004 – 11th International Power Electronics and Motion Control Conference , Riga.
55. Santos, P. J; Pires, A. J; Martins, A. G. 2004. "Short-term Load Forecasting Based on ANN Applied to Electrical Distribution Substations", Trabalho apresentado em UPEC 2004 – International Universities Power Engineering Conference, In UPEC 2004 – International Universities Power Engineering Conference, Bristol.
56. Lobato, P.; Pires, A. J; Dente, J. A. 2004. "A Methodology Based on Energy-Conversion Diagrams to Improve Switched Reluctance Generators Control", Trabalho apresentado em ICEM’04 – 16th International Conference on Electrical Machines, In ICEM’04 – 16th International Conference on Electrical Machines, Cracóvia.
57. Pires, Armando J; Cordeiro, José; Rodrigues, Vitor T; Filipe, Joaquim. 2004. "The Polytechnic Institute of Setúbal and the ICT – The Example of an e-Learning Project Based on the Theory of Organized Activity", Trabalho apresentado em EISTA’2004 – International Conference on Education and Information Systems: Technologies and Applications , In EISTA’2004 – International Conference on Education and Information Systems: Technologies and Applications , Orlando.
58. Rodrigues, Vitor T; Pires, Armando J. 2004. "Information System in the Polytechnic Institute of Setúbal", Trabalho apresentado em EUNIS 2004 – 10th International Conference on European University Information Systems , In EUNIS 2004 – 10th International Conference on European University Information Systems , Bled.
59. Santos, P. J; Martins, A. G; Pires, A. J. 2003. "Estimating Load Diagrams in Electricity Distribution Substations", Trabalho apresentado em ISAP 2003 – 12th Intelligent Systems Application to Power System Conference , In ISAP 2003 – 12th Intelligent Systems Application to Power System Conference , Lemnos.
60. Pires, Armando J; Rodrigues, Vitor T. 2003. "The ICT in the Polytechnic Institute of Setúbal – The Beginning of a New Phase", Trabalho apresentado em EISTA’2003 – International Conference on Education and Information Systems: Technologies and Applications, In EISTA’2003 – International Conference on Education and Information Systems: Technologies and Applications, Orlando.
61. Lobato, Pedro; Pires, A. J; Dente, J. A. 2003. "A Criteria for Designing Switched Reluctance Motors with Torque Ripple Reduction", Trabalho apresentado em 8CLEEE - 8º Congresso Luso-Espanhol de Engenharia Electrotécnica , In 8CLEEE - 8º Congresso Luso-Espanhol de Engenharia Electrotécnica , Vilamoura.
62. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2003. "Implementation of a Neuro-Fuzzy Speed Controller for a Switched Reluctance Machine", Trabalho apresentado em 8CLEEE - 8º Congresso Luso-Espanhol de Engenharia Electrotécnica, In 8CLEEE - 8º Congresso Luso-Espanhol de Engenharia Electrotécnica, Vilamoura.
63. Rafael, Silviano; Pires, A. J; Branco, P. J. C. 2003. "Implementation of an 8/6 Switched Reluctance MOSFET Current Controller: Simulation Study and Experimental Tests", Trabalho apresentado em IEEE-ISIE’03 – International Symposium on Industrial Electronics, In IEEE-ISIE’03 – International Symposium on Industrial Electronics, Rio de Janeiro.
64. Parreira, B.; Rafael, S.; Pires, A. J; Branco, P. J. C. 2003. "Obtaining the Magnetic Characteristics of an 8/6 Switched Reluctance Machine: FEM Analysis and Experimental Tests", Trabalho apresentado em IEEE-ISIE’03 – International Symposium on Industrial Electronics, In IEEE-ISIE’03 – International Symposium on Industrial Electronics, Rio de Janeiro.
65. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2003. "Supervision Language Control of Electromechanical Drives", Trabalho apresentado em IEEE-ISIE’03 – International Symposium on Industrial Electronics, In IEEE-ISIE’03 – International Symposium on Industrial Electronics, Rio de Janeiro.
66. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2002. "Formal Language Based Learning Algorithm for Electrical Drives Control", Trabalho apresentado em SEAL’02 - Conference on Simulated Evolution and Learning , In SEAL’02 - Conference on Simulated Evolution and Learning , Singapura.
67. Martins, João; Pires, Armando; Dente, António; Mendes, Rui V. 2002. "Formal Language Control of Induction Motor Drives", Trabalho apresentado em IECON-2002 – International Conference on Industrial Electronics, Control and Instrumentation, In IECON-2002 – International Conference on Industrial Electronics, Control and Instrumentation, Sevilha.
68. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2002. "Automatic Language Control of Drives", Trabalho apresentado em INES 2002 - International Conference on Intelligent Engineering Systems, In INES 2002 - International Conference on Intelligent Engineering Systems, Opatija.
69. Martins, J. F; Branco, P. J. C; Pires, A. J; Dente, J. A. 2000. "Fault Detection Using Immune-Based Systems and Formal Language Algorithms", Trabalho apresentado em CDC'2000 – 39th IEEE Conference on Decision and Control, In CDC'2000 – 39th IEEE Conference on Decision and Control, Sidney.
70. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2000. "A Novel Grammatical Inference Learning Algorithm for Automatic Modelling of Drive Systems", Trabalho apresentado em IAS2000 – IEEE Industry Applications Conference; Thirty fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy , In IAS2000 – IEEE Industry Applications Conference; Thirty fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy , Roma.
71. Martins, J. F; Pires, A. J; Mendes, R. V; Dente, J. A. 2000. "Modelling Electromechanical Drive Systems: A Formal Language Approach", Trabalho apresentado em 1st IFAC Conference on Mechatronic Systems, In 1st IFAC Conference on Mechatronic Systems, Darmstadt.
72. Santos, P. J; Silva, J. F; Pires, A. J. 1999. "An Electromagnetic Contactor with Large Voltage Range: A Comparative Study of Different Converter Topologies", Trabalho apresentado em 8th European Conference on Power Electronics and Applications EPE 99, In 8th European Conference on Power Electronics and Applications EPE 99, Lausanne.
73. Santos, P. J; Silva, J. F; Pires, A. J. 1999. "An Electromagnetic Contactor with Large Voltage Range: Study of Different Converter Topologies", Trabalho apresentado em EDPE’99 – International Conference on Electrical Drives and Power Electronics, In EDPE’99 – International Conference on Electrical Drives and Power Electronics, High Tatras.
74. Martins, J. F; Pires, A. J; Dente, J. A. 1998. "A Choice of Variables in Automatic Modelling of AC-Drive Systems", Trabalho apresentado em PEMC’98 – 8th International Power Electronics & Motion Control Conference, In PEMC’98 – 8th International Power Electronics & Motion Control Conference, Praga.
75. Santos, P. J; Silva, J. F; Pires, A. J. 1998. "A New Electromagnetic Contactor with Current Control and Wide Voltage Range", Trabalho apresentado em PEMC’98 - 8th International Power Electronics & Motion Control Conference, In PEMC’98 - 8th International Power Electronics & Motion Control Conference, Praga.
76. Martins, J. F; Pires, A. J; Dente, J. A. 1997. "Automatic Input/Output Modelling of a Squirrel-Cage Induction Motor Drive System Using Neural Network", Trabalho apresentado em EPE 1997 - 7th European Conference on Power Electronics and Applications, In EPE 1997 - 7th European Conference on Power Electronics and Applications, Trondheim.
77. Martins, J. F; Pires, A. J; Silva, J. F. 1997. "A Novel and Simple Current Controller for Three-Phase IGBT PWM Power Inverters - A Comparative Study", Trabalho apresentado em IEEE-ISIE’97 - International Symposium on Industrial Electronics, In IEEE-ISIE’97 - International Symposium on Industrial Electronics, Guimarães.
78. Martins, J. F; Silva, J. F; Pires, A. J. 1997. "A Novel and Simple Current Controller for Three-Phase IGBT PWM Power Inverters", Trabalho apresentado em IEEE-PESC’97 – 28th Annual IEEE Power Electronics Specialists Conference, In IEEE-PESC’97 – 28th Annual IEEE Power Electronics Specialists Conference, St. Louis.
79. Martins, J. F; Maia, J.; Pires, A. J; Dente, J. A. 1997. "The Application of Neural Networks and Bi-Orthogonal Decomposition in Automatic Modelling of AC-Drive Systems", Trabalho apresentado em ELECTROMOTION’97 – 2nd International Symposium on Advanced Electromechanical Motion Systems, In ELECTROMOTION’97 – 2nd International Symposium on Advanced Electromechanical Motion Systems, Cluj-Napoca.
80. Esteves, J.; Palma, J.; Pires, A. J. 1996. "Design and Evaluation of a Multimedia Package for Computer Based Training on Induction Motor Drives", Trabalho apresentado em ELECTRIMACS’96 – 5th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems , In ELECTRIMACS’96 – 5th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems , Saint-Nazaire.
81. Esteves, J.; Palma, J.; Pires, A. J. 1995. "Development of a Computer-Based Training Product on Induction Motor Drives", Trabalho apresentado em 6th EAEEIE – Annual Conference of the European Association for Education in Electrical and Information Engineering, In 6th EAEEIE – Annual Conference of the European Association for Education in Electrical and Information Engineering, Bolonha.
82. Pires, A. J; Dente, A.. 1994. "Variable Speed Induction Motor Drive Using a New Methodology for Controller Synthesis - Implementation Analysis", Trabalho apresentado em EPE-EDDA'94 – European Power Electronics Chapter Symposium, Electric Drive Design and Applications , In EPE-EDDA'94 – European Power Electronics Chapter Symposium, Electric Drive Design and Applications , Lausanne.
83. Pires, A. J; Esteves, J.. 1994. "Non-linear Control Methodology Application on Variable Speed AC Drives", Trabalho apresentado em PEMC' 94 – West-East Technology Bridge International Conference on Power Electronics, Motion Control and Associated Applications , In PEMC' 94 – West-East Technology Bridge International Conference on Power Electronics, Motion Control and Associated Applications , Varsóvia.
84. Pires, A. J; Dente, A.. 1994. "A New Methodology for Induction Machine Control", Trabalho apresentado em MELECON 94 – 7th Mediterranean Electrotechnical Conference, In MELECON 94 – 7th Mediterranean Electrotechnical Conference, Antalya.
85. Pires, A. J; Garrido, M. S; Pierrat, L.. 1992. "The Commutation in Polyphase Brushless Exciters", Trabalho apresentado em ICEM 92 - International Conference on Electrical Machines, In ICEM 92 - International Conference on Electrical Machines, Manchester.
86. Esteves, J.; Pires, A. J; Dente, J. A. 1991. "Position Control of a Permanent Magnet Synchronous Motor by Previously Defined Trajectories", Trabalho apresentado em IECON 91 - International Conference on Industrial Electronics, Control and Instrumentation, In IECON 91 - International Conference on Industrial Electronics, Control and Instrumentation, Kobe.
87. Pires, A. J; Dente, A.. 1991. "A New Induction Machine Model for the Synthesis of Tracking-Controllers - Implementation Aspects Approach", Trabalho apresentado em EPE 91 – 4th European Conference on Power Electronics and Applications, In EPE 91 – 4th European Conference on Power Electronics and Applications, Florença.
88. Esteves, J.; Pires, A. J; Dente, J. A. 1991. "Robust Position Control of a Permanent Magnet Synchronous Motor Using Sliding Mode Control and Previously Defined Trajectories", Trabalho apresentado em AMSE 91 ‘Signals and Systems’ , In AMSE 91 ‘Signals and Systems’ , Varsóvia.
89. Pires, A. J; Dente, A.. 1991. "A New Induction Machine Model for Tracking-Controllers Synthesis", Trabalho apresentado em IMACS 91 – 13th World Congress on Computation and Applied Mathematics, In IMACS 91 – 13th World Congress on Computation and Applied Mathematics, Dublin.
90. Campion, G.; Garrido, M. S; Pires, A. J. 1990. "Control of Saturated Induction Motors by the Input-Output Linearization Method", Trabalho apresentado em IMACS-TC1’90 – 3rd International Symposium on Modelling and Simulation of Electrical Machines and Static Converters , In IMACS-TC1’90 – 3rd International Symposium on Modelling and Simulation of Electrical Machines and Static Converters , Nancy.
91. Dente, J. A; Pires, Armando J. 1989. "Máquina Assíncrona Autopilotada pelo Fluxo Rotórico", Trabalho apresentado em ENDIEL 89 – Encontro Nacional para o Desenvolvimento das Indústrias Eléctricas e Electrónicas , In ENDIEL 89 – Encontro Nacional para o Desenvolvimento das Indústrias Eléctricas e Electrónicas , Porto.
92. Pires, A. J; Gudefin, E.; Garrido, M. S. 1988. "Dynamic model of triangular wave brushless exciters", Trabalho apresentado em IMACS 88 - 12th World Congress on Computation and Applied Mathematics, In IMACS 88 - 12th World Congress on Computation and Applied Mathematics, Paris.





Dados Complementares (Additional data)


Orientações
Orientations


Tese de Doutoramento
Phd Thesis
Concluídas
Completed
1. Pedro José Ambrósio Lobato, Paradigmas Construtivos da Máquina Elétrica de Relutância Comutada - Aplicação em Regime de Baixas Velocidades – Aproveitamentos de Energias Renováveis, 2015. Tese (Engenharia Eletrotécnica e de Computadores) - Universidade Nova de Lisboa (Orientador).
2. Silviano Francisco Santos Rafael, Controlo de Posição Angular de uma Máquina Eléctrica de Relutância Comutada 8/6, 2010. Tese (Engenharia Eletrotécnica e de Computadores) - Universidade Nova de Lisboa (Orientador).


Outros Trabalhos
Other production
1. Pires, A. J. Coordenação do Energy Efficiency Group - CTS-UNINOVA, 2017.
2. Pires, A. J. Coordenação do RDI Working Group - EURASHE, 2017.
3. Pires, A. J. Coordenação do RDI Working Group - EURASHE, 2016.
4. Pires, A. J. Coordenação do Energy Efficiency Group - CTS-UNINOVA, 2016.
5. Pires, A. J. Coordenação do Energy Efficiency Group - CTS-UNINOVA, 2015.



Participação em outros júris
Other jury participation


Concursos de aquisição
Aquisition concourse
1. A. J. Pires. Presidente do Júri do concurso SABIN (Concurso Interno para Atribuição de Licenças Sabáticas Parciais), 2017.
2. A. J. Pires. Presidente do Júri do concurso SABIN (Concurso Interno para Atribuição de Licenças Sabáticas Parciais), 2016.


Concurso de Professor Coordenador
Coordinator professor tender
1. A. J. Pires. Concurso Documental para Professor Coordenador Principal na Área Disciplinar de Engenharia de Produção e Sistemas da Escola Superior de Tecnologia do Instituto Politécnico do Cávado e do Ave, 2015. Instituto Politécnico do Cávado e do Ave.


Concurso de Professor Adjunto
Adjunt professor tender
1. A. J. Pires. Concurso para Professor Adjunto na Área Disciplinar de Informática (ESTSetúbal/IPS), 2017.
2. A. J. Pires. Concurso para Professor Adjunto na Área Disciplinar de Mecânica dos Meios Sólidos (ESTSetúbal/IPS), 2016. Instituto Politécnico de Setúbal.



Participação em eventos
Event participation
Participação como Membro da Comissão Científica
Participation as Member of the Program Committee
1. DoCEIS 2017 (8th Advanced Doctoral Conference on Computing, Electrical and Industrial Systems), 2017 (Congresso).
2. DoCEIS 2016 (7th Advanced Doctoral Conference on Computing, Electrical and Industrial Systems), 2016 (Congresso).
3. CPE-POWERENG 2016, 2016 (Congresso).
4. CPE 2015 (9th International Conference on Compatibility and Power Electronics), 2015 (Congresso).

Participação como Membro da Comissão de Honra
Participation as Member of the Honour Committee
1. POWERENG 2015 (5th International Conference on Power Engineering, Energy and Electrical Drives), 2015 (Congresso).

Participação como Moderador
Participation as Chairman
1. Encontro ASIBEI-IPS 2017, 2017 (Encontro).

Outro tipo de participação
Other kind of participation
1. Semana da Ciência e Tecnologia (SCT), 2017 (Outra).
2. visita UAS Finlândia, 2016 (Outra).
3. visita UAS Holanda, 2016 (Outra).
4. visita IT Irlanda, 2016 (Outra).
5. CPE-POWERENG 2016, 2016 (Congresso).
Nome do evento: Apresentação do artigo: "Metrology based Calculation of Voltage Control Services provided by Advanced Generation Modules".
6. CPE-POWERENG 2016, 2016 (Congresso).
Nome do evento: Apresentação do artigo: "Induction Motor Broken Bar Fault Detection Based on MCSA, MSCSA and PCA: A Comparative Study".
7. IECON 2015, 2015 (Congresso).
Nome do evento: Apresentação do artigo: "A new teaching tool to enhance Power Quality assessment".



Participação editorial em revistas
Magazine editorial participation
1. A. J. Pires. Revista de Ensino de Engenharia, desde 2010/01/02, Função ou tipo de participação: Corpo editorial, Editora: Associação Brasileira de Ensino de Engenharia.







Indicadores de produção (Production indicators)

Total
Produção científica
Scientific production
126

Livros e capítulos
Books and book chapters
10
Livros publicados ou organizados
Published or organized books
2
Capítulos de livros publicados
Published book chapters
8
Artigos científicos em revistas
Papers in periodics
24
Com arbitragem científica
With scientific refereeing
24
Trabalhos em eventos
Papers in conference proceedings
92
Com arbitragem científica
With scientific refereeing
92

Total
Dados complementares
(Additional data)
26

Orientações
Orientations
2
Outros Trabalhos
Other production
5
Participação em Outros Júris
Other jury participation
5
Participação em Eventos
Event participation
13
Participação editorial em revistas
Magazine editorial participation
1


Visualizações do curriculum [ 4333 ]
 
Página gerada pela Plataforma de Curricula DeGóis promovida pela FCT e pelo Gávea/DSI/UM em 04-12-2020 às 14:24:50
Plataforma de Curricula DeGóis: http://www.degois.pt/ | Icons by Axialis Team
Co-Autores Relacionados no DeGóis (8)
 Co-authors listed in Degóis
Colaboração em projetos no DeGóis (1)
 Project collaboration in Degóis